Step 8:
FINE ADJUSTING THE BRAKES
Option 1
: Release or tighten the brakes
by twisting the screw at the brake clamp.
Option 2:
Release or tighten the brakes by
twisting the set screw at the brake lever.
This will help loosen the brake wire
in order to use pliers to pull the wire.
Ensure the wire is tight enough and yet
doesn’t touch the wheel rim when
the brakes aren’t in action. Then close
the clamp with the allen key.
Repeat the same procedure for the
rear wheel brakes.
Summary of Contents for AYIA
Page 1: ...Manual AYIA 1 1...
