2
19
11
ENG
For the rowing machine to stand safely and securely, the rear stand (2) is equipped with two adjustable feet
(19). With these it is possible to level out the device and compensate for any unevenness in the floor.
Screw both adjustable feet (19) as far as they will go into the stand (2). Now both feet are at the same level to
start from. Put the rowing machine in the desired location and check to see if it is stable and standing securely
on the floor. If it is slightly wobbly, unscrew the appropriate adjustable foot until the device is stable. If the floor in
the chosen location is so uneven that the wobbling cannot not be eliminated using the adjustable feet, then you
must select another location which is more even for your rowing machine.
This rowing machine is fitted with transport rollers on the front stand to make it easy for you to transport it. To
push the rowing machine into another location, lift the rear stand far enough up until the transport rollers are
contacting the floor. Now you can push or pull the device into the desired new location. Lower the rear stand
gently onto the floor. Make sure when lifting, transporting and putting down the device that you have a secure
footing and that you hold onto it firmly.
Levelling the Device
Transport
