25
24
24
21
23
28
26
6
6
6
6
9
ENG
Assembly Step 2.2:
Fix the bracket with safety pin (23) to the rear mount on the main frame (25) using one screw set (28). Make
sure that bracket (23) is the right way around – see diagram.
Then fix the bracket with safety pin (23) using the axle set (26) to the moveable base tube (21).
Then place guide tube (24) onto the right and left of the front axle mount on the main frame (25) and the axle
mount on the moveable main tube (21) and fix each of these with two screw sets (6).
Caution:
Please only tighten the screws hand tight until all components have been assembled correctly. Only after this
should the screws be tightened firmly.
Assembly
Summary of Contents for Multi-Press 6.0
Page 1: ...ENG Multi Press 6 0 I N S TA L L AT I O N O P E R AT I N G M A N U A L...
Page 20: ...Notes 20...
Page 21: ...Notes 21 ENG...
