Maxxus 7.8, Installation & Operating Manual, Page: 5 / 40

5
ENG
B33 (2) B41 (3) B32 (4) B30 (6) B28 (7)
Washer
Ø5/16”x30x2.0T - 4
Piece
Hexagon Socket
Screw
M8x25 mm - 2 Piece
Hexagon Head Screw
M8x16 mm - 4 Piece
Curved Washer
M8x20x1.5T - 4 Piece
Carriage Bolt
M8x50 mm - 4 Piece
B40 (8) B44 (9) B29 (14)
Tapping Screw
M5x16 mm - 10 Piece
Hexagon Head Screw
M8x20 mm - 4 Piece
Locking Nut M8
4 Piece
Wrench (13mm/14mm)/Philips Screw Driver Allen Key (M6) Allen Key (M5)
Fixing Materials & Tools
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are
bulky and heavy.
Check that all the parts and fixing materials (screws, nuts, etc.) have been delivered.
Assemble the parts carefully as any damages or defects occurring due to mistakes made at the time of assem-
bly are not covered by the warranty or guarantee. Therefore, read through the assembly instructions carefully
before you start assembling, follow each assembly step exactly as described and keep to the correct sequence
of assembly as instructed. Assembly of the training device must be carried out thoroughly by adults only.
Assemble the training device in a location which is level, clean and clear of obstructions. 2 people are required
to carry out the assembly. Training can only start when the training device has been fully assembled.
Your own tools can be used instead of or in addition to the tools included in delivery. Make sure that any tools
used are suitable and an accurate fit!