Maxxus 7.8, Installation & Operating Manual, Page: 12 / 40

Position A
Position B
D02
B17
A16
12
Etape 11 : Assemblage du cockpit
Loosen the four pre-assembled round head screws (B17) on the back of the cockpit (D02). Connect the cable
protruding from out of the cockpit (D02) with the cables coming out of the fixed handle bar (A16).
Please be aware that the two cables for the hand pulse sensors have identical connections. The connecting se-
quence here is not important. The other cables can be clearly identified by their connections. Now fix the cockpit
(D02) with the four round head screws (B17) to the cockpit bracket on the fixed handle bar (A16).
CAUTION:
Please make sure here that the cables do not get jammed or damaged.
Step 12: Levelling the Device
Make sure your exercise equipment is always level. In order to compensate for minor bumps or slopes in the
floor, adjustable feet are fitted on the right and left of the front and rear stands and on the sliding frame. To make
sure the position of the device is level, first turn all feet to the lowest position (position A). If necessary, adjust
the feet until the device is level and stable.
If the adjustment range of the levelling feet is not enough to allow safe standing of the training device, please
check the surface of the location and, if necessary, choose a different location, where a safe and level position
can be ensured.
Assembly
Stabiliser Stabiliser