MAXXO CD03, Manual, Page: 58 / 67

FM Setup
• FM Area
Choose the Region according to your physical location to define the search range
for the radio.
• Scan setting
Either "All stations" or "strong stations" (with stronger signal) can be selected for
the scan.
• Audio setting
You can choose to set "Auto Stereo" or "Forced mono" for the reception.
• FM full scan
You can always carry out a new scanning of FM channels by selecting this option.
All current presets and channels will be erased.
The radio at the lowest frequency of the scanned values will be highlighted. The
preset list will be saved unless a new preset scan is carried out.
• FM station list
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight
one of the preset, then press the
[ ►] button, it will enter into the Edit menu.
Always press the [◄] button to return to the Preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area
automatically through internet connection and these stations can be accessed by a
press of
[Local] button on remote. You can also set Local in another region if you
want. Highlight the Local Radio and press OK . Choose Manual-set Local radio to
change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming:
Repeat All, Repeat One, Shuffle and Normal.
Resume play options
This is to set the device whether to return to the last operating mode when it is
switched on or displays the Home screen.
Power-On Options
This is to select the state of the radio after a power reset or power cut, whether to
return to Standby or the state subject to the option selected from the "Resume play
options".
Dimmer
You can set the backlight level for the display as you prefer. There are two settings:
Mode and Level
• Mode - Normal or Power Saving
Normal — the display will stay with the same level of brightness all the time without
dim down.
15. Configuration
58