MAXXO CD03, Manual, Page: 56 / 67

Here you will find the complete settings / options available to configure your own
radio. On the main menu, navigate to Configuration setting. Press OK and you will
see a list of options available.
Network
Network Options
Always on: The WLAN function remains switched on (faster access when
switching from other modes of radio).
Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use
(to save energy).
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be
variation between different countries. Therefore it is necessary to choose the Wi-
Fi channels to ensure the Wi- Fi performs satisfactory.
We have already set the channels according to the requirement in different
countries. Choose the country you are staying from the list to get the correct
channel.
Add / Remove AP
Add AP (Scan) — It will scan out a list of routers around.
Add AP (WPS button) — Choose this option to connect your Wi-Fi router via WPS
if the router has a WPS button.
Remove AP — If you have already added a router and want to remove it, choose
this option.
Note - Always bring the radio within 2 meters of the Wi-Fi router for setup.
AP: [ ]
If you have added more than one routers on the radio and want to switch to
another one, select this option to change.
Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by
the radio. Usually signal levels lower than -70dBm is at weaker level and if it
affects the reception of your radio, you may need to optimize the router location or
check any problem of the router itself.
IP
The IP is set Dynamic by default. Select to change Fixed IP according to your
network condition.
DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to
your network condition.
Date and Time
The radio will set your local time automatically after the internet connection is
completed. If you want to do manual setting, change it by the following options:
15. Configuration
56