EN
16
Consult the instructions for using
the descaling agent with regard
to the ratio of water to descaling
agent.
2. Empty the kettle after heating. Do not
drink this water.
3. Fill the kettle with drinking water and
bring it to the boil at least once more
to remove any residues of the descal-
ing agent. Do not drink this water!
STORAGE
•
Disconnect the device from the mains
power when it is not going to be used
for a prolonged period. Clean the de-
vice again if necessary (see the “Care
and Descaling” chapter) and let it dry
completely.
•
Store the device and all accessories
in a dry, clean, frost-free place that
is protected from direct sunlight and
cannot be accessed by children or
animals.
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair an elec-
trical device yourself!
The device does not work.
The mains plug is not inserted in the plug
socket correctly.
►
Correct the fit of the mains plug.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the mains connec-
tion.
The fi eld
START / CANCEL
(
14
) has not
been touched.
►
Switch on the device by tapping the
fi eld
START / CANCEL
.
The fuse in the fuse box is triggered.
Too many devices connected to the same
circuit.
►
Reduce the number of devices in the
circuit.
Water runs out of the device.
There is too much water in the kettle (
10
).
►
Do not fill the kettle beyond the
MAX
marking (
7
)!
The device does not switch off.
The lid (
1
) is not closed.
►
Always make sure that the lid is
closed correctly.
The device switches off during the
heating process.
The amount of water is below the
MIN
marking (
7
).
►
Pour water at least up to the
MIN
marking in the kettle (
10
).
A large amount of steam is produced
in the heating process.
The device is furred up.
►
Descale the device.
During use, an unpleasant smell is
detected.
The device is being used for the fi rst time.
►
A smell often develops when new de-
vices are first used. The smell should
disappear once the device has been
used several times.
The device has previously been descaled.
►
Rinse out the device with clear water.
09971_Inlay_DE-EN-FR-NL_A5_V1.indb 16
09971_Inlay_DE-EN-FR-NL_A5_V1.indb 16
04.09.2020 13:09:45
04.09.2020 13:09:45
