
Vacuum Cleaner LED Power Control
EN
17
socket. The charge control lamp
on the battery fl ashes red or
on
the touch display (
6
) fl ashes and the
battery status display (
12
) indicates
the charge status in %. The battery is
being charged.
The battery can also be charged
while the device is plugged in
the wall bracket (
B
). The wall
bracket has a recess for the barrel
connector of the mains adapter
(
Picture F
).
• If the charge control lamp fl ashes
green or the battery status display
shows 100, the battery is fully char-
ged.
The touch display switches off ap-
prox. 10 minutes after the battery
is fully charged.
• First disconnect the mains adapter
from the mains power and then
disconnect the barrel connector from
the battery.
ATTACHING THE WALL
BRACKET
Please Note!
■
Use the fastening material supplied
to hang up the wall bracket. If you are
unsure whether the fastening material
supplied is suitable for the wall, seek
advice from a specialist stockist.
■
Hang the wall bracket in a secure and
solid position.
■
Before drilling, ensure that there are
no pipes or cables behind the inten-
ded drilling point.
1. Place the wall bracket (
B
) against the
wall and mark out two drill holes (at
the top and bottom).
2. Drill holes into the wall and place
dowels in them.
3. Screw the wall bracket onto the wall.
ACCESSORIES
• The
microfi bre fl oor nozzle
(
H
) is
suitable for both carpets and hard
fl oors. It has a rotating microfi bre
roller and is thus particularly suitable
for delicate fl oor surfaces. The LEDs
illuminate dark areas, to allow even
more thorough cleaning.
• The
combi nozzle
(
D
) is a combinati-
on of a small crevice nozzle and brush
nozzle. Press the release button on
the brush attachment and slide it
upwards at the same time to turn the
crevice nozzle into a brush nozzle
(
Picture D
). The brush attachment
must be heard to engage in place:
○
The crevice nozzle is suitable for
upholstery, cleaning the inside of
cars and for all nooks and crannies.
○
The brush nozzle is used for vacu-
uming upholstery and textiles and
for removing dust from delicate
objects such as picture frames, lamp
shades, keyboards, books etc.
• The
long
crevice nozzle
(
C
) is suitable
for places which are hard to get to,
such as corners, crevices or recesses.
• The
extension tube
(
G
) makes it ea-
sier to reach the tops of cupboards,
ceilings and corners and, along with
the microfi bre fl oor nozzle, allows
fl oors to be cleaned.
• The
wall bracket
(
B
) is suitable for
storing the device in a space-saving
manner. The integrated bracket for
the combi nozzle and crevice nozzle
is suitable for securing the two nozz-
les easily so as to save space.