background image

KEYPAD CONTROLS

FOR

MAXXFAN

®

 

Deluxe

 MODELS

5100KI • 6200KI

7000KI • 7500KI

5100KI40 • 6200KI40

7000KI40 • 7500KI40

NOTE: A beeping sound will confirm 

each key press

ON/OFF:

   Use this key to 

start the fan or to turn off the fan.  On Automatic Opening Models the lid will 

also open or close when the fan is turned on or off.   On Manual Opening 

Models pushing this key while in Auto Mode will exit Auto Mode, turn off the 

fan and the lid will stay in the position you selected.  On Automatic Opening 

Models this button will exit Auto mode, turn the fan off, and close the lid.

IN/OUT: 

  Use this key to reverse the direction of the fan, the fan will slow 

down and pause for two (2) seconds before resuming operation in the opposite 

direction.  

Note:

 In Auto Mode the fan direction is automatically positioned to 

Exhaust, but may be overridden and changed to Intake by depressing this key.  

Note:

 Some models are Exhaust Only.  On these models this key is deleted.

AUTO: 

  Auto Mode allows the thermostat to turn the fan 

ON and OFF

 

depending on the thermostat setting.   Press this key once for less than three (3) 

seconds to enter Auto Mode, three (3) quick beeps will confirm the MAXXFAN 

has entered Auto Mode.  To EXIT Auto Mode, press the

 ON/OFF

 key.  Initial 

factory set point for the thermostat is 26°C.  The green LED will light to indicate 

the MAXXFAN is in Auto Mode.  To adjust, follow instructions below:

If no previous thermostat temperature was entered, or you wish to change a 

previous set temperature, press the HOLD TO SET key for more than 3 seconds 

and you will hear one long beep and the thermostat will be reset to 26°C.  To 

further adjust the set temperature, if desired, use the (+) or (-) Arrow keys to 

adjust at 0.5°C increments per press.  The fan will emit a beeping sound to 

confirm this setting.  If a previous thermostat temperature was entered, the fan 

will remember this temperature setting and the next time you enter Auto Mode, 

the fan will start ventilating automatically as directed by the thermostat.  The 

fan speed will automatically adjust based on the cabin temperature.  As cabin 

temperature rises, the fan increases in speed.  

Note:

 If 12 volt RV power is 

removed from the MAXXFAN, the thermostat will be reset to 26°C.

ARROW

When in Auto Mode:

  Use the (+) & (-) Arrow keys to adjust the thermostat 

set temperature up or down in 0.5 °C increments per press.

When in Manual Mode:

  Use the (+) & (-) Arrow keys to adjust the fan speed 

up or down.  When the fan speed reaches either the maximum or minimum 

speed, the fan will respond with 2 quick beeps to indicate this.

ARROW KEYS PRESSED TOGETHER:

   

Automatic Lift Models Only

Press the (+) & (-) Arrow keys at the same time to Open or Close the lid.  The 

fan motor will remain in its current state.

HOLD

TO SET

26°C

6

“More information https://www.caravansplus.com.au"

Summary of Contents for MAXXFAN Deluxe Series









Reviews: