Maxx Cold MCWC28-O, Instruction Manual

Page: 2 / 14

1
IMPORTANT SAFEGUARDS
Read all instructions before using this appliance. Use this appliance only for its
intended purpose as described in this instruction manual. Always exercise basic
safety precautions, as described below. After reading the instruction manual,
store it in an accessible place where the user(s) of this product can easily find it.
The purpose of these safety precautions is to ensure safe and correct use of the
product to minimize risks that could cause serious damage and injury to you or
others. The safety precautions are divided into WARNINGS and CAUTIONS.
1. All repairs, disassembly and modifications should be performed only by
qualified technicians. Attempting to perform these yourself could result in fire,
malfunction and injury.
2. Never splash water directly onto the product or wash with water without
unplugging as a short circuit could result. In a rainy environment, a water-proof
covering is recommended.
3. Never put flammable or volatile substances into unit as explosion and fire
could result.
4. Do not damage, modify, excessively bend, strain, twist or bundle the power
cord. Also, placing heavy objects on the power cord or binding could damage
the cord, possibly resulting in electrical shock or fire.
5. Use a dedicated wall outlet. Do not use an extension cord or multiple-outlet
adaptor as this could result in electrical shock, overheating and fire.
6. Never use flammable spray cans or leave flammable substances near the unit.
Sparks from electrical switches could result in explosion or fire. If a
combustible gas is present near the appliance, turn off the source of the gas,
then open the windows and doors to allow the gas to dissipate. To avoid an
explosion, do not pull the plug or switch off the unit.
7. The electrical socket must have good grounding. The ground wire cannot be
connected with a gas pipe, heating pipe, water pipe, telephone line or lightning
rod. It cannot be replaced with the neutral wire of single-phase power. In
addition to the ground wire, an electrical leakage circuit breaker is also
required.
8. If installation in a damp location is unavoidable, have an electrician install a
ground fault circuit interrupter (GFCI) electrical outlet. If no GFCI is installed,