Assembling and Using the
Utility Cart
Always wear ANSI approved
safety goggles.
Refer to the Assembly Diagram on page
5.
A. Read all Personal and Work Area Safety
Warnings on pages 2 and 3 before assem-
bling and using this product.
B. Identify the Lower Tray (2) with its slightly
different design than the other 2 Trays (1).
C. Insert Casters (5 and 6) up into the
Lower Tray (2). Casters should lock in
place. Note: Both Locking Casters (6) fit on
the same end - see Assembly Diagram.
D. Add a Side Tube (3) to each corner of the
Lower Tray (2).
E. Place a Tray (1) on top of the 4 Side
Tubes (3). Made sure the Tray is tightly se-
cured to the 4 Side Tubes.
F. Add 4 more Side Tubes (3) to the corners
of Tray (1).
G. Add another Tray (1) on top of the 4 Side
Tubes (3). Made sure Tray is securely in
place.
H. Insert a Handle (4) into each end of the
top Tray (1).
I. With assembly complete, check to make
sure that all connections are tight and se-
cure. The Utility Cart should roll smoothly.
With your foot, press on the side tab of each
Locking Caster to make sure that the Cast-
ers lock properly. Lift the side tab to unlock
the Casters.
J. Each Tray is rated
to support up to 75 lbs. load capacity, with
the Utility Cart having a total combined load
capacity of 225 Lbs.
Do not overload the
Trays.
Maintaining the Storage Bin Rack
A. The general condition of this product
should be checked periodically. Make sure
that all connections are tight. Make sure that
all components are in good condition, with
no cracks or other damage noted.
Model 80774 Page 4
Note: Some parts are listed and shown for illustration pur-
poses only, and are not available as replacement parts.
Manufactured for and distributed by:
Maxx Group, LLC
300 S. Lewis Road, Suite H
Camarillo, CA 93012 USA
www.maxxhaul.com
Load Capacity
Each Tray = 75 Lbs.
Total Utility Rack = 225
Lbs.
Construction
Polypropylene Trays;
Aluminum Side Tubes
Swivel Casters
Qty = 4 (2 are locking)
SPECIFICATIONS
WARNING
