background image

10

ENGLISH

cially in the regions with “hard” water.

•  Set the steam supply control (3) to the « » 

(off) position.

•  Fill the water tank (9) till the max mark using 

the jug (13).

•  Put the iron on the base (8). Place the iron 

vertically.

•  Insert the power plug into the outlet.
•  Set the temperature control (10) to the max. 

temperature of the iron sole, the (6) indica-
tor will light up. 

•  When the sole temperature (12) reaches the 

desired temperature value, the (6) indicator 
will go out, you can start cleaning of the iron 
chamber.

• Unplug the iron.
•  Hold the iron above the sink horizontally, set 

and hold the constant steam supply control 
(3) in the “SELF-CLEAN” position.

• Boiling water together with scale will be 

throwing out from the openings in the iron 
sole (12).

• Slightly sway the iron back and forth, until 

water goes out of the water tank (9).

•  Place the iron on the base (8) and let it cool 

down completely.

•  When the sole (12) cools down completely, 

wipe it with a dry cloth.

• Before you take the iron for storing, make 

sure that there is no water in the water tank 
(9) and that the iron sole (12) is completely 
dry. 

CLEAN AND CARE

•  Before cleaning the iron, make sure that it is 

turned off and has cooled completely.

• Wipe the iron's outer surface with a damp 

cloth and then wipe dry.

•  Sediment on the iron sole can be removed 

with a cloth dampened in vinegar-water so-
lution.

• After removing sediment, polish the sole 

with a dry cloth.

• Do not use abrasive substances to clean 

the sole and body of the iron.

•  Avoid touching the iron sole with sharp met-

al objects.

STORAGE

•  Turn the temperature control (10) anticlock-

wise to the “min” position, and the constant 
steam supply control to the “ ” position. 

•  Remove the plug from the socket.
• Open the water tank lid (2), turn over the 

iron and drain any remaining water from the 
water tank (9). Close the lid (2).

• Set the iron vertically and allow it to cool 

completely.

•  Wind the power cord.
•  Keep the unit vertically in a dry cool place, 

out of reach of children.

Delivery set

Iron– 1 pc.
Water tank – 1 pc.

TECHNICAL CHARACTERISTICS

Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 1850-2200 W

Specifications subject to change without 
prior notice.

Service life of  appliance -  3 years.

GUARANTEE

 

Details regarding guarantee conditions can 
be obtained from the dealer from whom the 
appliance was purchased. The bill of sale or 
receipt must be produced when making any 
claim under the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directive 89/336/EEC 
and to the Law Voltage Regulation 
(73/23 EEC)

MW-3014.indd   10

MW-3014.indd   10

25.03.2011   17:45:07

25.03.2011   17:45:07

Summary of Contents for MW-3014









































Reviews: