Maxwell MW-2021 BK Manual Instruction Download

Page: 8 / 24

ENGLISH

danger that can be caused by its improper
usage.

•

To avoid damages, transport the unit in origi-
nal  package  only.  Never  use  the  unit  if  the
power  cord  or  the  plug  is  damaged,  if  the
hairdryer  works  improperly  or  after  it  was
dropped. Do not try to repair the unit by your-
self. Contact an authorized service center for
all repair issues.

Keep the unit in a dry cool place out of reach
of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY

USING THE HAIRDRYER

After  unit  transportation  or  storage  under
cold  (winter)  conditions,  it  is  necessary  to
keep  it  for  at  least  two  hours  at  room  tem-
perature before switching on.

–

Before switching the unit on, make sure that
your home mains voltage corresponds to unit
operating voltage.

–

Remove any stickers that can prevent unit
operation.

–

Unwind the power cord completely.

–

Unfold the handle (4)

–

Insert the power plug into the mains socket.

–

Use the switch (1) to set the air supply speed
and temperature:
«0» – the hairdryer is switched off;
«I» – low speed and low temperature;
«II» – high speed and high temperature.

Note: During the first operation some foreign
smell and a small amount of smoke from the
heating element is possible, this is normal.

–

This model has a “cool” air supply function,
use it to fix your hairstyle. For cool air supply,
switch the hairdryer on, then press and hold
the button (2)

–

After you finish the unit operation, set the
switch (1) to the position «0».

Hair care

To get the best results, wash your hair with sham-
poo, remove excessive moisture with a towel,
comb your hair, then start drying and styling it.

Quick drying

Set the switch (1) to the position «II». Shake off
excessive moisture from the hair with your hand
or a comb and constantly move the hairdryer
above your hair.

Straightening

Set the switch (1) to the position «II» and prelimi-
narily dry your hair. Once your hair is almost dry,
set the switch (1) to the position «I». Divide your
hair into locks, start straightening from the lower
layers. Using a plain or a round brush, comb the
hair downwards and simultaneously direct hot air
at your hair. This way, slowly straighten each lock
from root to end. After you finish straightening
the lower locks, straighten the locks of the middle
layer and finish with locks of the upper hair layer.

Natural wavy hairstyle

Set the switch (1) to the position «I», grip locks
between fingers tightly, turn them in the direction
of natural curling. Dry your hair, directing the
airflow between fingers. Once the required effect
is achieved, press and hold the сool shot button
(2)

and fix each lock.

Styling

Set the switch (1) to the position «I».
Divide your hair into locks and create a required
hair style by means of a round hair-styling brush.
During hair styling, direct the air flow straight at
your hair.
If you want to fix the hairstyle, direct the cool air
flow at each lock for 2-5 seconds. Styling time is
determined individually according to hair type;
you can adjust it by yourself.

Overheating protection

Overheating  protection  switches  the  hairdryer
off  if  the  outgoing  air  is  too  hot.  If  the  haird-
ryer  is  switched  off  during  operation,  set  the
switch  (1)  to  the  «0»  position,  unplug  the  hair-
dryer and make sure that the inlets and outlets
are  unblocked.  Let  the  hairdryer  cool  down  for
5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid get-
ting of hair into its air inlet.

CLEANING AND CARE

The hairdryer is intended for household usage only.

–

Set the switch (1) to the «0» position and dis-
connect the hairdryer from the mains.

–

Clean the unit body with a damp cloth and
then wipe it dry.

–

Clean the air inlet grid (3) with a little brush.

–

Never immerse the unit into water or other
liquids.

–

Do not use abrasives and solvents to clean
the unit body.