MAXWALD A 5000, Instruction Manual

Page: 2 / 30

- 2 -
Dear customer
We are delighted that you have decided on a MAXWALD skidding winch made in Austria.
Please read this instruction manual carefully and heed all of the advice included in these
pages before putting the cable winch into service.
Table of contents
Page
3 Introduction
3/4 Information on intended use – Accident prevention
5 Winch description
Operating instructions (during work)
6 1) Preparation / Attachment / Assembly
7 2) Operation / Control
2a) with pulling rope
8 2b) with pulling rope and hydraulic clutch cylinder / alternative 0
9 2c) with remote cable control / control panel (electro-hydraulic) / alternative IV
10 2d) with radio control ("intermittent brake")
11 Hydraulic cable entry brake / cable discharge
12 Maintenance / Servicing
13 Faults
Spare parts (drawing/list): rope-controlled winch with reduction gear and
spooling device
Spare parts (drawing/list): rope-controlled winch and alternative 0
Spare parts (drawing/list): winch with electro-hydraulic control / alternative IV
Spare parts (drawing/list): cable entry brake / cable discharge
Electrical wiring diagram
Hand-over protocol – Please complete and confirm before returning!
Declaration of conformity