To align the dish to Astra 2 using the sky receiver, use the SIGNAL TEST menu built into the SKY™ digibox.
To access this menu:
Press the SERVICES button on the remote control. Enter SYSTEM SETUP (number 4).
Enter SIGNAL TEST (number 6). The display will then show, from top to bottom:
SIGNAL STRENGTH - SIGNAL QUALITY- LOCK INDICATOR - NETWORK ID - TRANSPORT STREAM.
You will need to adjust the dish until there is at least a quarter of the SIGNAL QUALITY bar display,
the LOCK INDICATOR shows OK and the NETWORK ID is displaying 0002. If the NETWORK ID is
showing any other details, you have locked onto the wrong satellite and will need to re-align the dish.
Press BACK Up to exit menu’s.
Connecting Your Precision Waterways
Signal Strength Meter On SKY® Box
A. Single LNB
B. Twin LNB - Only available on models MXL024/55TWIN
Note: A twin LNB system can also be connected to 2 receivers. Or 2 TV’s with in-built satellite tuners.
B
A
10
LNB 1
LNB 2
Main TV
