Page 38
Keys with special functions
Storage Information
Information on the USB storage medium used.
DVR configuration (requires password input)
Formatting of the USB storage medium used. Please note that when formatting,
all data stored on the USB storage medium will get lost!
Jump (optional)
> Timeshift
With the time-shift function, you can stop a started programme and watch it later. The
receiver records the programme on the USB storage medium. The displayed image will
be frozen so that you can continue later at this point. To use this function, this menu item
must be enabled. Press the PAUSE key once in normal mode. When you want to continue
the programme, press the Play key. Now, you will see the programme from the point you
have pressed the PAUSE key. If this menu item is disabled, the image will just be frozen
when pressing the PAUSE key.
The programme recorded via the time-shift function will not be stored permanently on the
hard disk. By switching over to another channel or stopping the recording, the time-shift
recording will be rejected. The time-shift function has a capacity of maximum 90 minutes.
> Jump
Determine the length of time steps during reproduction with the skip keys __.
The minimum length is 30 seconds, the maximum length is 30 minutes.
Switching between TV and Radio
With the
TV/Radio
key you can switch between TV and the radio function.
The receiver transmits a radio channel and shows a background image.
> To return from the radio transmission to the TV channel, press the “TV/Radio” key of the
remote control.
0 – Sleep timer
You can go to the sleep timer in normal mode by pressing the 0 key.
You have the following setting options by pressing the 0 key again: off, 10, 30, 60, 90, 120
minutes. After this time, the receiver will be switched off automatically.
MXL020HD INSTRUCTIONS REVISION.indd 38
15/05/2013 14:12
