Install Windows Driver
17
Existing Windows 2000 Installation
If you have an existing installation of Windows 2000 or XP on a SATA or Ultra ATA drive that you wish to connect to the SATA/
150 PCI card, DO NOT connect the drive to the card yet. Leave the drive attached to its current controller. You must install the
Windows driver for the SATA/150 PCI Card before connecting your hard drive to the card.
The following section details the installation of SATA/150 PCI Card drivers on a system that has Windows 2000
already installed and running.
1.
After installing the SATA/150 PCI Card and rebooting your system, Windows 2000 will detect a Mass
Storage Controller and display the Found New Hardware Wizard. Insert the driver diskette or CD.
(If you inserted a CD, close the language chooser that appears.)
2.
In the Found New Hardware Wizard window, click Next.
3.
Select “Search for a suitable driver for my device (recommended)” then click Next.
4.
Select the “Specify a location” checkbox, deselect the other checkboxes, and click Next.
5.
Click the Browse button.
6.
Browse to the Win2000 folder on the driver diskette or CD, then click Open.
7.
Click OK.
8.
Windows will detect the driver for the Maxtor SATA/150 PCI Card. Click Next.
9.
When the wizard has finished installing the driver, remove any floppies or CDs then click Finish to restart
your system.
Summary of Contents for SATA /150 PCI CARD
Page 1: ...SATA 150 PCI CARD Installation Guide P N 20237700 ...
Page 31: ......
