Installation
3-18 Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT
8
"
Once you have installed the Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT hard
disk drive, and adapter board (if required) in the host system, you are ready to
partition and format the drive for operation. To set up the drive correctly, follow
these steps:
1. Power on the system.
2. Run the SETUP program. This is generally on a Diagnostics or Utilities
disk, or within the system’s BIOS. Some system BIOS have an auto-
detecting feature making SETUP unnecessary.
3. Enter the appropriate parameters.
The SETUP program allows you to enter the types of optional hardware installed—
such as the hard disk drive type, the floppy disk drive capacity, and the display
adapter type. The system’s BIOS uses this information to initialize the system when
the power is switched on. For instructions on how to use the SETUP program, refer
to the system manual for your PC.
During the AT system CMOS setup, you must enter the drive type for the Maxtor
D740X-6L hard disk drives. The drive supports the translation of its physical drive
geometry parameters such as cylinders, heads, and sectors per track to a logical
addressing mode. The drive can work with different BIOS drive-type tables of the
various host systems.
You can choose any drive type that does not exceed the capacity of the drive. Table
3-3 gives the logical parameters that provide the maximum capacity on the Maxtor
D740X-6L family of hard disk drives.
Logical Addressing Format
Note:
*Capacity may be restricted to 8.4GB (or less) due to system
BIOS limitations. Check with your system manufacturer to de-
termine if your BIOS supports LBA Mode for hard drives greater
than 8.4GB. Default logical cylinders is limited to 16,383 as per
the ATA-4 specifications.
! "
20.0GB
40.0GB
60.0GB
80.0GB
LBA Capacity
20.0GB
40.0GB
60.0GB
80.0GB
CHS Capacity
8,455MB
8,455MB
8,455MB
8,455MB
Logical Cylinders
16,383*
(39,813)
16,383*
(58,168)
16,383*
(77,557)
16,383*
(116,336)
Logical Heads
16
16
16
16
Logical Sectors/
Track
63
63
63
63
Total Number
Logical Sectors
40,132,503
78,177,792
117,266,688
156,355,584
Summary of Contents for D740X-6L 20.0 AT
