MAXTEK 72413, User Manual

Page: 8 / 20

6
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Playing a Record
Setting the speed
On the record label itself there will be a direction to what speed the
record should be played at. This will be either:
• 33 RPM
• 45 RPM
• 78 RPM
Move the RPM switch to the appropriate speed setting.
Placing the Record
Always handle records by the edge and/or label. Remove the record
from the outer jacket and dust sleeve. Line up the record’s center
hole over the spindle and place the record on to the turntable.
For some 45 RPM records a 45 adaptor ring is needed. Remove the
45 adaptor from the holder on the record player and place it over the
spindle. Line up the record’s center hole over the 45 adaptor and
place the record on to the turntable.
Starting the Record
Make sure you have released the tone arm catch. Place a finger
underneath the tone arm strut and raise the tone arm. Carefully swing
the tone arm over the record until the stylus is over the ‘lead in grove’
on the outer edge of the record (see page 12). Lower it gently into
place. You will hear the audio after a few seconds, once the stylus
has passed from the ‘lead in grove’ into the record’s audio ‘grove’.
Using the Auto Off
If the auto off feature is turned on this will stop the turntable from
spinning once the end of the record has been reached. If this is left
off the turntable will keep spinning regardless of the position on the
tone arm.