MAXTEK 72413, User Manual

Page: 10 / 20

8
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Maintenance
Replacing the Cartridge
If you want to upgrade or replace your cartridge you can by
removing the existing one. You will need a small flat head
screwdriver in order to do this. Remove the stylus as previously
describe on page 7 before attempting to remove the cartridge
in order to protect the stylus.
Use the screwdriver to carefully lift the cartridge release clip enough
to eject the body of the cartridge. Carefully remove the 3 spade clips
at the back of the cartridge to fully release it. Connect the spade
clips to the new cartridge and slide it back into position then push
the front edge up until the cartridge release clip secures it in place.
Finally replace the stylus and test the replacement by playing a
record.
Please Note:
Replace the cartridge cover after use to keep the stylus clean and
protected after use.
Cartridge
Release Clip
Small
Flat Head
Screwdriver