10
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Radio Operation
Choose Radio Band
Press the BND Button anytime to access the radio
function. The unit comes with five bands, three FM
Bands (FM1, FM2, and FM3) and two AM Bands
(AM1, and AM2). Each of the five bands can store
up to six preset stations, for a total of 30 preset
memory stations.
Radio Tune / Seek Function
In radio mode, press the “|<<” or “>>|” button for 2
seconds to automatically seek the next strong and
clear radio station. Press and hold the “|<<” or “>>|”
button until the screen shows MANUAL. At this time,
you can manually fine tune your desired frequency
by pressing “|<<” or “>>|”. Wait until the MANUAL
disappears in order to perform auto seek again.
Mono / Stereo Reception Control
In FM radio mode, Press “ST” button on the display
“ST ON” will show on the screen . This will allow
you to change between Mono and Stereo reception.
Save Your Preset Stations
There are six numbered preset buttons which
can store and recall stations for each band. While
listening to a radio station you would like to save
as a pre-set, press and hold one of the buttons
numbered 1-6 on the fascia until the preset station
number is shown. The button you pressed is now
the pre-set button for that station.
Automatic Scan & Store
While listening to the FM or AM Radio, press and
hold the F/PS Button for 4 seconds. The receiver
will automatically scan and save to the presets the
strongest radio station signals available to you in
your area.
Scan Saved Stations
Press the F/PS button once to perform the preset
scanning function. In FM or AM mode, press the F/
PS button and the stations stored in the FM band
preset will be scanned. The scan will pause on each
preset for 6 seconds before moving on to the next.
To stop and listen to a preset of your choice press
the SEL dial.
Local / DX
Press LOC Button on the display. When “LOC ON”
is shown on the display, this means local reception
is turned on. When “LOC OFF” is shown on the
display, this means distant reception is turned on.
Local and distance reception settings can facilitate
the radio reception, depending on the location in
which the radio is being used.
TA - (Traffic Announcement)
Press and hold the TA button so that the unit will
receive traffic announcement from local radio
stations.
To choose the TA mode, press the VOL dial for
2 seconds, the display will show “TA SEEK”.
Rotate the encoder volume to choose between
the TA SEEK and TA ALARM, after choosing,
please leave the unit idle for the mode to activate.
In TA SEEK mode, the unit will seek for traffic
announcement program when TA is pressed.
When in TA ALARM mode, no TA/TP is displayed
and the alarm is set off.
PTY - (Program Type)
This radio will allow you to select the type of
program required, and will search for a station
broadcasting that type of program. Press and
hold the PTY button once to show the music
type. Then press 1-6 button to choose the
different music types available.
Press the PTY button twice to show the speech
type program. Then press 1-6 button to choose
the different speech type program. Each number
key will show 3 different speech programs for you
to choose.
RDS Operation
This unit is equipped with the latest technology
of EON control, so that when you are listening
to Radio or other function, if there is any travel
announcement from a nearby local station, the
radio will already know the frequency of that radio
station. Then it will receive the station, turn up the
volume, or interrupt the playback of the music for
the duration of the announcement. At the end
of the announcement the radio will return to its
previous state ready for the next announcement.
Summary of Contents for 67531
Page 32: ......
