10
\Bn
n=1-9 Send a 1/10 second line break to the modem,
where n = 1 to 9. At normal connect, the
default is 3
\C_
\C0
Do not buffer data during LAPM/MNP
handshaking
\C1
Buffer all data for 4 seconds, until receiving
200 characters or until a packet is detected
\C2
Do not buffer data; switch to normal mode
when fallback character is detected
\G_
\G0
Disable DCE flow control
\G1
Enable DCE flow control
\J_
J0
Disable serial port data rate adjustment
(keep high data rate between DTE and
modem, regardless of modem-to-modem
data rate)
J1
Enable serial port data rate adjustment so
serial data rate automatically adjusts to match
the modem-to-modem data rate
\Kn
n=0-5 Set break control, where n= 0 to 5. Default
is 5
\N_
\N0
Normal data-link only
\N1
Direct data-link only
\N2
MNP data link only
\N3
V.42/MNP/Normal data link
\N4
V.42 data link only
\O
Initiate reliable link during a normal link
\Q_
\Q0
Turn off flow control
\Q1
XON/XOFF software flow control
\Q2
CTS signal unidirectional hardware flow
control
\Q3
RTS/CTS signal bi-directional hardware
flow control
\Tn
Inactivity timer, where n = 0 to 90 minutes.
Default is 0
\U
Accept reliable link during a normal link
\V_
\V0
Do not send extended responses
\V1
Send extended response set 1
\V2
Send extended response set 2
\X_
\X0
Process XON/XOFF but don’t pass through
\X1
Process XON/XOFF and pass through
