MaxPro PROFESSIONAL MPPW750/1500, Manual

Page: 4 / 14

2 3 GB GB
safety warnings and all instruc Failure to follow the warnings and instruc may result in electric
shock, fi re and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plas ger of su ff oca The power tool noise
output may exceed 85dB(A) at the workplace. In this instance, wear ear prot
GENERAL SAFETY
Read all safety warnings and all ins Failure to follow the warnings and ins may result in
electric shock, fi re and/or serious injury.
Save all warnings and ins for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or ba ery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Clu ered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while opera a power tool. Distr can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodi fi ed plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet c Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When opera a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If opera a power tool in a damp loca is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when opera
a power tool. Do not use
a power tool while you are red or under the in fl uence of drugs, alcohol or medica . A moment of
ina en ra ower tools may result in serious personal injury.
b) Use personal prot ve equipment. Always wear eye prot Protec ve equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing prot used for appropriate c s will reduce
personal injuries.
c) Prevent uninten st g. Ensure the switch is in the o ff - before c g to power
source and/or ba ery pack, picking up or carrying the tool. Carrying power tools with your fin ger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjus key or wrench before turning the power tool on. A wrench or a key le a ached
to a rota part of the power tool may result in personal injury. e) Do not overreach. Keep proper f
and balance a This enables be er control of the power tool in unexpected situa
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the c of dust extr and c f ensure these are
connected and properly used. Use of dust c can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applica
The correct power tool
will do the job be er and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o ff . Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the ba ery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preven ve safety measures
reduce the risk of st ower tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these ins
to operate the power tool. Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other c
that may a ff ect the power tool’s opera If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cu tools sharp and clean. Properly maintained cu tools with sharp cu edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instruc ons, taking into
account the working c
work to be performed.
Use of the power tool for opera ff erent from those intended could result in a hazardous situa
5) Service
a) Have your power tool serviced by a
qualified repair person using only iden cal replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR PIPE WELDING TOOL
The product uses a single-phase tripolar plug which cannot be changed by the user without approval. For
applica
gged in a socket with earth wire.
During opera hands and fl ammable and explosive objects shall not contact the thermo-block of the
electrical fusion splicer to avoid accidents which may result in personal injury.
Any non-professional is not permi ed to start the fusion splicer to prevent electrical shock and damages to
the security structure and performances of the tool.
If the red indicator is always on/o
ff , it may indicate that the instrument fails. Thereby, Shut o ff it
immediately and cut o ff the p ower. The instrument cannot be used un roubles are eliminated.
The instrument with faults (if any) shall be sent to the local distributor or manufacturer for maintenance.
Any user is not permi ed to dismantle the instrument without approval.
Before delivery, the maximum hea
temperature of the fusion splicer is regulated in the factory.
Therefore, any nonprofessional shall not regulate it randomly to avoid the adverse e ff ect on its normal
opera rvice life.
Read the manual
Warning Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
SYMBOLS