background image

22

Chapter 11

Appendix

Complies with the FCC rules as mentioned in the following paragraph:
This Equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed 
to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct the 
interference at his own expense.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that 
may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by 
MAXphotonics can void the user’s authority to use the equipment.

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION

Summary of Contents for E1-10W

























Reviews: