11921
Slauson
Ave.
Santa
Fe
Springs,
CA.
90670
(800)
227-41
16
F
AX
(888)
771-7713
PAGE 13
CONTROL SWITCH CHANNEL INSTALLATION
Some vehicles are equipped with rear tail lights mounted on the corner
post. This will require modification of the switch channel. Drill a 1/2 Dia. ac-
cess hole through the street side Corner Post, just above the light. With the
Channel holes on top, cut the Channel length as required (2 Min.), and weld
to the Corner Post (approximately 18 from top of Channel to the vehicle bed).
1/2 WELD
BOTH SIDES
3/4 No Weld
18
Approx.
3/8 Dia. Cable must be routed
through or around the rear lights.
(When switch is installed)
