309-1980
SIDE 7 OF 8 (3/12)
FREESTANDING DESK APPLICATIONS
Illustration 6. Attach a Return or Bridge to a Peninsula Worksurface Using a Support Leg:
1. Position support leg under peninsula
worksurface. Align flat bracket center
line locating notch with front edge of
peninsula worksurface and rear edge
with modesty panel top flange. Attach
support leg to peninsula worksurface
by installing two machine screws
through flat bracket and into inserts in
peninsula worksurface.
2. Use three sheet metal screws to
attach peninsula modesty panel to
support leg.
3. Use three sheet metal screws to
attach return/bridge modesty panel to
opposite side of support leg.
4. Position return/bridge worksurface
onto flat bracket. Install two machine
screws through flat bracket and into
inserts in return/bridge worksurface.
Install wood screws through return/
bridge modesty panel (at each end
and at center location) and into
return/bridge worksurface.
Sheet metal
screw
Sheet metal screw
Wood screw
Center line
locating notch
Peninsula
worksurface
Machine screw
Flat bracket
Return/bridge
worksurface
Return/bridge
modesty panel
Return/bridge modesty panel
Support leg
~
~
Surpass
®
