309-1980
SIDE 3 OF 8 (3/12)
FREESTANDING DESK APPLICATIONS
Illustration 3. Primary Desk with Gussets:
Full end panel
support
Gusset - Position rear edge
of gusset 1
7
/
8
" from rear
edge of worksurface (gus-
set should run parallel with
rear edge of worksurface).
Worksurface
3rd - Wood screws (three
per gusset): Install
through top flange of
gusset and into
worksurface.
2nd - Sheet metal screws (two per gusset): Install
through gusset and into full end panel supports.
1st - Machine screw (three per full
end panel support): Install into
worksurface inserts.
Surpass worksurfaces, full end panel supports, and gussets can be configured as freestanding desks. For ease of
assembly, assemble unit upside down onto cardboard or a carpeted surface.
Note:
Dependent on user preference, cosmetic side
(flat side) of gusset can face either front or
rear edge of worksurface.
Surpass
®
