11
delete anunwanted channel from the scan list. Nuisance delete
can be activated only when receiving the unwanted channel.
The feature can be programmed alone on a single option
button or combined with the monitor function. Turning the
unit off and on will return the unit to the original scan list.
•
Talk-around:
When programmed, pressing the appropriate
option button once will activate talk-around mode. Pressing
the option button again, or rotating the channel selection knob
will disable talk-around function.
•
Scan:
When programmed, pressing the appropriate option
button will enable the radio's programmed scan function.
•
Edit Group Scan List:
When programmed, allows editing
of channels you wish to scan.
Status Indicators and Audible Alert Tones
Your SP-150 has a sophisticated microprocessor control
which provides a series of audible alert tones. Upon initial
power up, a single tone indicates that the self-test of the
microprocessor functions have been completed satisfactorily.
A series of tones may sound with any of these conditions:
•
Busy System Queuing, indicates your radio has been placed
in the queuing mode and is attempting to access the System
•
Low battery condition
•
Selecting a Channel with no
programmed frequency
(The following are all initially programmed into the radio
by your Dealer)
•
Attempt to transmit on a System /Channel
that is already in use when busy channel lockout has been
programmed
•
Call Received
•
Clear-to-Talk/Transmit
indicates you may begin speaking
•
Transmit not available
indicates you are denied transmission on that System /
Channel
•
Time-Out-Timer indicates you have exceeded
the maximum transmission time
