MaxonSM5102Radio
○
2 Push the appropriate [0]-[9], A,B,C,D,*,# to enter the desired character.
○
3 Push the CLR Key. Number or character will be deleted at last Number or character.
○
4 Push and hold the CLR key. All messages will be deleted. the radio enter the standby mode.
○
5 Push the RCL key. Press the number key. DTMF message which is stored number is displayed at LCD.
○
6 Push the RCL Key. Press the #,* key to removed the displayed data from the LCD. the radio enter the
standby mode.
○
7 Push and hold the RCL Key. the radio is changed with Number mode and Alphabet mode.
○
8 Push and hold the STR Key to blink the cursor. Push [*] to move the cursor to left. Push[#] to move the
cursor to the right
○
9 Push the STR Key in the edit mode. Press the number key. DTMF message is stored
-display[STORE Num]
○
10 Push the SND key to transmitter the DTMF data.
2.1.2.2 Clearing a Dialed Number
When a number has been accidentally entered during auto dial a press and release of the CLR key will
delete an individual number. A press and hold of the CLR key will clear the entire dialed number.
2.1.2.3 To Store a Number in Memory
Dial the desired number. Entered number will show in the radio display.
Press and release the STR key.
Press and release any number 0 – 9 to store the number, * and # cannot be used for storing a number.
STORed will show in the radio display indicating the number has been stored in memory under that key.
2.1.2.4 To Recall a Stored number from Memory
Press and release the RCL key.
Press and release the number key from which a number has been stored.
Press SND to dial the recalled number.
If a number has been accidentally recalled repeat steps 1. and 2. until the proper number has been recalled.
2.1.2.5 Clearing a Stored Number
Press and release the RCL key.
Press and release the number key from which a number has been stored. The stored number will show in
the radio display.
Press and hold the CLR key to remove the stored number. A new number can now be entered and stored in
that location.
2.1.2.5 Decode action
●
Stun – this shall prevent any transmission from the radio and will also mute the speaker.
●
Revive – this shall re-activate the radio.
●
Covert On – a valid address shall cause the radio to cycle between Tx mode and Rx mode. The time
periods spent in Tx and Rx modes shall be programmed into the addressee radio, however, it will be the
Base Station or DTMF Sender, that remotely turns this feature ON or OFF.
●
Covert Off – this shall remotely turn the radios’ covert mode off, i.e. the radio will return back to passive
receive mode.
■
SMS
1. Receiving an SMS
- When an SMS is received : the SMS data is displayed
- When the received SMS includes more than 8 characters, “
►
” appear.
Push any button to return to the standby condition.
2. Received message selection
-The Radio memorizes the received messaged for record. UP to 9 messages for SMS, of 40 character SMS
can be memorized. The oldest message is erased when the 10th message is received. However, once the
radio is powered off, all messages are cleared.
○
1 .Push [SMS] : displays “RECORD”
○
2 .Push[SMS] : Displays message memory
○
3 .Push [ UP] or [DOWN] to select the desired message
- When selecting the SMS that includes more than 8 characters, “
►
” appear.
