Maxon SL100, User Manual

Page: 16 / 83

Channel Group Edit
To edit the group scan list in a radio programmed for chan-
nel group scan, turn the radio off, press and hold scan but-
ton Ç .
While holding scan button, turn the radio on À and observe
a single red flash of the LED Â . The display Á will read SE.
Release the scan button.
The first group number will be displayed. If you do not wish
to edit the group you have selected press the s or t but-
tons Æ to select the desired channel groups you wish to
edit. After channel group selection has been made, press
and release the scan button.
The channel number within your selected channel group
may now be edited.
If the channel number Á is flashing, that channel is already
included in the scan list of the selected channel group. If the
channel number is solid, the channel can be added or delet-
ed from the scan list. Press and release the monitor button
È , the selected channel will flash if it was added to the scan
list or be solid if it was deleted from the scan list.
To edit other channels, press the s or t buttons Æ to select
the desired channel within the channel group. To add or
delete the newly selected channel from the channel group
scan list, repeat the process detailed above. Upon comple-
tion of editing channels on your channel group scan list,
press and release the scan button Ç . Your new channel
group scan list should be entered at this time.
PRIORITY CHANNEL EDIT
Only one priority channel can be programmed into the radio.
To edit a priority channel, turn the radio off À , press and
hold scan button Ç . While holding the scan button, turn
radio on À , and release the scan button after the second
red flash of the LED Â .
PE will be shown in the display Á . Release the scan button.
The first channel number will be displayed. If displayed
channel is not your priority channel, press and release the
s or t buttons Æ to select the desired priority channel.
After you have selected the channel, a flashing channel
number indicates that the channel is already selected as pri-
ority. If channel number is solid, the channel is not selected
as priority. To add or delete the selected channel as the pri-
ority channel, press and release the monitor button È . The
selected channel will flash if it was added as a priority chan-
nel or will be solid if deleted as the priority. Upon completion
of adding or deleting the priority channel, press and release
the scan button. Your new priority channel should be
entered at this time.
ENGLISH
14