background image

 29

FCC NOTICE (pending approval) 

 

This equipment has been tested and found to comply with the limits for a Class B 

digital device pursuant to Part 15 of the FCC rules.  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses, and radiates radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio or 
television communications.  However, there is no guarantee that interference will not 
occur in a particular installation.  If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
 

Re-orient or relocate this equipment. 

Re-orient or relocate the receiving antenna of the device displaying the interference. 

Increase the separation between this equipment and the receiver. 

Connect this equipment into an AC outlet on a circuit different from that to which the 
receiver is connected. 

Contact your service provider or dealer or an experienced radio/TV technician for 
help. 

 

WARRANTY INFORMATION 

 
 

Please see the enclosed warranty card for warranty information for your SAU-

1900E. 
 

 

FOR YOUR RECORDS 

 

Please record the following information for warranty and in case your SAU-1900E 

is stolen or lost: 
 
Date of Purchase:  ________________ 
 
Where Purchased:  _________________ 
 
Serial Number:  ____________________ 
 
Attach sales receipt here. 

Summary of Contents for SAU-1900E






























Reviews: