17
www.maxoncic.co.uk
②
Press the knob to set, back to upper rank.
③
To move back to upper menu, press the red button.
2) SelCall
①
Rotate the right selector knob to select Yes or No.
②
Press the knob to set, back to upper rank.
③
To move back to upper menu, press the red button.
5.3 Status Setting
Consists of two modes similar to “Send” or “Receive Check”; Pre-programmed status is sent to the
ID to the channel receiving. And the receiving message can be checked. (Refer to menu table).
1) Send
①
Display pre-programmed Status. Rotate the right selector knob to select a status to be sent,
press the right selector knob to set.
②
Rotate the right selector knob to select the ID which you wanted to send the status. And then
press the right selector knob to set.
③
After automatically getting out of the menu, the radio sends the status, with the receiver’s ID
and a sender’s ID orderly.
STATE L i s t e n
S t a t u s L i s t
STATE Meeting
S t a t u s L i s t
Send t o
DT NM
GUARDROOM
Sand to
Sand to
DT NM
GUARDROOM
DT NM
GUARDROOM
001
CH 001
Y E S
SELCALL
SELCALL
ID ANI
Y E S
N O
SELCALL
SELCALL
Y E S
DTMF
DTMF
ID ANI
