8
Channel Selector
Rotate to select a channel. Turn clockwise to increase the channel and counterclockwise to
decrease the channel.
Press to select a group if the group is set.
Press and hold over 2 seconds to enter into the menu.
Microphone Jack
Insert the microphone plug into this jack.
S Key
Press the key to activate its programmable function. The default setting is RF power/Selcall.
A Key
Press the key to activate its programmable function. The default setting is Key tone/Menu.
B Key
Press the key to activate its programmable function. The default setting is TX inhibit/Scan.
Key
Press the key to activate its programmable function. The default setting is Monitor. When in the
Menu, a key press will step back one step. Also used as an exit key.
TX/Busy LED
TX LED lights red while transmitting.
PTT Switch
To send a voice transmission, press and hold the switch, and then speak into the microphone.
Release PTT to receive.
