manualshive.com logo in svg

Maxon MM-6854, Application Notes

Share
Download
Maxon MM-6854 Application Notes Download Page 3

MM6854/64 Dual Band GSM Data Modem

Issue 1.0

ME 820047

03/00

Page i

WARNINGS

Internal components containing beryllium oxide are used in the equipment.  Dust from this material is a
health hazard if inhaled or allowed to come into contact with the skin.  Great care must be taken when
handling these components.  They must not be broken or subjected to excessive heat.

Never operate the modem without the correct Maxon antenna, or a suitable artificial load, connected.

Never modify a modem, or accessory, except as instructed by Maxon in a formal communication as this may
invalidate any warranty, guarantee or type approval.

Do not operate this equipment in environments containing explosive materials or vapour.  This includes
Petrol service stations.

This equipment should only be operated while stationary or with a hands-free accessory, provided that doing
so does not interfere with driving safety.

This equipment should not be operated on an aircraft as it is forbidden by law. It should not be operated in
the vicinity of medical equipment.

Summary of Contents for MM-6854


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands