manualshive.com logo in svg

Maxon MM-6854, Application Notes

Share
Download
Maxon MM-6854 Application Notes Download Page 29

MM6854/64 Dual Band GSM Data Modem

Issue 1.0

ME 820047

03/00

Page 21

5.1.33 AT+CMGF – Message format

This command allows you to define the input and output format of the short message.

Enter

AT+CMGF=0

AT+CMGF=1

AT+CMGF=?

Response

Set to PDU mode, a complete SMS message including all
header information is passed as a binary string.
Set to text mode, all commands and responses are in ASCII
characters.
Displays all supported values.

Notes: 

None.

Result codes:

OK
ERROR
Message service failure result codes.

5.1.34 AT+CMGL – List messages

This command is used to list the SMS messages stored in the modem.

Enter

AT+CMGL=<STAT>
Where <STAT>
In text mode:
“REC UNREAD”
“REC READ”
“STO UNSENT”
“STO SEND”
“ALL”
In PDU mode:
0
1
2
3
4

AT+CMGL::<index>,
<stat>,<da>,<CR>,<LF>,<dat
a>
Where <data>
<da>
<index>

AT+CMGL=?

Response

Receive unread messages.
Stored read messages.
Stored unsent messages.
Stored sent messages.
All messages

Received unread messages
Stored read messages
Stored unsent messages
Stored sent messages
All messages

TP user data GSM 03.40
Destination Address type value according to GSM 03.40.
Location in memory.

Displays the supported values.

Notes: 

None.

Result codes:

OK
ERROR
Message service failure result codes.

Summary of Contents for MM-6854


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands