manualshive.com logo in svg

Maxon MA-2020, User Manual, Page: 57 / 100

Share
Download
Maxon MA-2020 User Manual Download Page 57

 

 

In User Manual 

 

 
 

    

                                                  

 

 

 
 

- 57 - 

 
Factory  

Resets the In to firmware factory settings. This will wipe all the settings on the 
modem, including the configured saved profile settings. This can also be achieved by 
holding down the modem reset button for between 20 and 60 seconds.  
 

Partial upload 

Allows for partial/incremental firmware updates to the modem, rather than updating 
the entire firmware file. The file format is a .zip file of the partial firmware component 
and the internal path for installation. This is especially useful in conserving network 
limited data when using conservative network data plans. Partial upload is also used to 
upload secure socket and secure syslog keys and certificates to the modem.  
 

Module upload 

Updates the internal cellular module firmware using module .usf file format.  
 

B/L upload 

Allows for modem bootloader update.  
 

F/W upload 

–

 FOTA  

Update the modem full firmware file.  
 

Note:

 Any update should only be attempted with the assistance of Maxon. 

Summary of Contents for MA-2020





































































































Reviews:

No comments