Maxon Intelimax+4G, User Manual

Page: 36 / 94

In4G User Manual
- 36 -
will be established according to the S0 setting. If a CSD call is dial out of the modem, the
IP stack server will stop listening and allow the TCP client connection assigned to the
dialled number to be connecting to the remote server.
RING Message
To emulate the incoming CSD call the In will print out RING messages at a rate of
one RING per second according the S0 setting. In order to account for this delay when
dialling out through the modem, it is advisable to add a CONNECT message delay using
the AT$$TCPDEL=<MS> command, e.g. AT$$TCPDEL=2000 for a 2 second delay before
printing out the CONNECT message (this command can only be set via AT commands,
not through the GUI).
GUI Setup
Up to 50 phone numbers can be added to match to destination IP addresses and port
numbers. It is recommended that 5-10 numbers are added at a time through the GUI
before saving and rebooting the modem to reduce the risk of GUI connection timeout
and lost entries.