Maxon GPC X1-LDF, Installation Manual

Page: 18 / 76

Preparing for installation
12
3 20 908 395
Spacer ring
2
4 20 908 398
Installation adapter
2
5 20 908 639
Installation adapter
1
6 20 908 640
Installation adapter
1
7 20 909 327
Cheese-head screw
with hexagon socket DIN 912 - M10x90 - 8.8 - ZN -
PRE80
8
12 80 000 029
Hexagon head screw
ISO 4017 - M12x25 - 8.8 -
ZFSHL
2
13 80 000 032
Hexagon head screw
DIN 933 - M12x40 - 8.8 - A2K
2
14 80 000 050
Hexagon nut
DIN 934 - M12 - 8 - A2K 2
15 80 000 061
Spring washer
DIN 127 - A - 10 - ZN
8

Pre-
install the installation adapters on the liftgate’s lifting gear as shown in Fig. 11
or Fig. 13, tightening the fittings until hand-tight.
IMPORTANT: Depending on the vehicle, choose either the 3.5 ton (see Fig. 11) or 5
ton (see Fig. 13) installation version.
Vehicle with maximum authorized mass of 3.5 tons
(for 5 ton vehicles, see next page)
Fig. 11