Maintenance
Troubleshooting
maxon BIKE
DRIVE
| User Manual | rel8583
33
2.2
Troubleshooting
Display on
the
PowerGrip
Cause:
During shut down or after full discharge of the battery, the
deenergized condition of the motor will briefly be displayed at the PowerGrip.
Remedy:
You do not need to do anything! For safety reasons, the power
supply will first be interrupted to the motor before the entire BIKE
DRIVE
will
be switched off.
Cause:
The PowerGrip has detected an error in the system.
Remedy:
Turn BIKE
DRIVE
off (
page 6). Wait for one minute. Turn
BIKE
DRIVE
on.
Consult your specialized dealer if the error still should persist.
Display on
the battery
Flashing pattern:
The LEDs flash once per second
Cause:
Battery is in status «Safety condition overtemperature during
discharge».
Remedy:
Turn BIKE
DRIVE
off (
page 6). Wait for 15 minutes. Turn
BIKE
DRIVE
on.
Flashing pattern:
The LEDs flash every 4 seconds
Cause:
Battery is in status «Safety shutdown during discharge».
Remedy:
Check if battery is charged. Turn BIKE
DRIVE
off (
page 6). Wait for
15 minutes. Turn BIKE
DRIVE
on.
Flashing pattern:
The LEDs flash every 10 seconds
Cause:
Error on the battery.
Remedy:
Turn BIKE
DRIVE
off (
page 6). Wait for 15 minutes. Turn
BIKE
DRIVE
on.
Consult your specialized dealer if the error still should persist.
Display on
the battery
Running lights:
During the charging process, the LEDs display a running light
to the current charging level
Cause:
The battery temperature is outside the permitted charging
temperature (
Remedy:
If the ambient temperature is outside the charging temperature,
stop charging and resume at a suitably tempered location.
If the ambient temperature is within the charging temperature, you do not
need to do anything. Charging will continue automatically as soon as the
battery temperature is within the permitted charging temperature.
