Maintenance
Care & Maintenance
24
maxon BIKE
DRIVE
| User Manual | rel8583
2.1.5.5
Mounting the PowerGrip
IMPORTANT
• When installed, the PowerGrip must freely rotate. It must thereby
automatically bounce back when «Boost» is released.
• For MTB carbon handlebars you must use carbon assembly paste.
Mount
PowerGrip
and handle-
bar grip
1) Plug Control Cable to Power-
Grip and tighten screw cap.
2) Slide PowerGrip and handle-
bar grip on handlebar and
define their axial position.
3) Make sure that handlebar
grip touches the Power-
Grip’s inner diameter, mount
plastics spacer if needed.
Fix
PowerGrip
and handle-
bar grip
4) Turn PowerGrip radially into
an ergonomically comfort-
able position.
5) Cautiously tighten mounting
screws on PowerGrip (and
handlebar grip, if any).
IMPORTANT
The PowerGrip must rotate
freely and must automatically
bounce back when «Boost» is
released.
