Maxon 7840 Manual Download Page 8

 

Licensing and Service Information

 

 

FCC Licensing 
 

The Federal Communications Commission requires that the operator of this radio be properly 
licensed under the applicable Part and/or Parts of the FCC Rules and Regulations. 
 
Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about 
obtaining a license. 
 

Service 
 

Do not tamper with internal adjustments. Damage to the equipment and/or improper operation 
may result. There are no user serviceable items inside the radio. 
 
It is recommended that you return your radio to a qualified Maxon Dealer for any service or 
repairs. 
 

Recycling/Disposal of Batteries

 

 
The U.S. Environmental Protection Agency (EPA) classifies used Ni-MH batteries as hazardous 
waste, unless certain exemptions apply. 
 
The battery should be recycled at the end of its useful life. Under various state or local laws, such 
batteries must be recycled or disposed of properly and cannot be dumped in landfills or 
incinerators. 
 
Maxon America, Inc. fully endorses and encourages the recycling of Ni-MH batteries. A national 
program to collect and recycle used Ni-MH batteries is being implemented by the Rechargeable 
Battery Recycling Corporation (RBRC Ö). This program is being funded through the use of 
license fees paid by the battery and product manufacturers to place the RBRCÖ Seal on the 
batteries. 
 
The following is a list of facilities where the batteries can be shipped to be recycled. Contact 
these facilities for proper packaging and shipping guidelines. 

 
Software Copyrights 
 

The Maxon products described in this operating instruction manual may include copyrighted 
Maxon software programs stored in semi-conductor memories or other media. Laws in the United 
States and other countries preserve for Maxon certain exclusive rights for copy-righted software 
programs, including the exclusive right to copy or reproduce in any form the copyrighted software 
program. Accordingly, the copyrighted Maxon software programs contained in the Maxon 
products described in this operating instruction manual may not be copied or reproduced without 
the express written permission of Maxon. Furthermore, the purchase of Maxon products shall not 
be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the 
copyrights, patents or patent applications of Maxon, except for normal non-exclusive royalty free 
license to use that arises by operation of law in the sale of a product. 

 
Maintenance 

 
Your SP-0402 Radio is designed to be maintenance free. To keep your radio in good working 
condition: 
 

Summary of Contents for 7840










Reviews: