Setup
Potentiometers
maxon motor control
3-28
Document ID: rel7132
ESCON Servo Controller
Edition: November 2018
ESCON 36/3 EC Hardware Reference
© 2018 maxon motor. Subject to change without prior notice.
3.4.7
ESCON 36/3 EC Connector Set
If you decide not to employ maxon motor’s prefab cable assemblies, you might wish to use the prepack-
aged kit that contains all connectors required to make up your own cabling.
Table 3-24
ESCON 36/3 EC Connector Set – Content
Best Practice
If you should decide not to use the ready-made cable assemblies, we strongly suggest that you use the
following hand tools:
• Hirose hand crimper (DF3-TA22HC) for crimping contacts DF3-22SC…
• Hirose hand crimper (DF3-TA2428HC) for crimping contacts DF3-2428SC…
• Lumberg hand crimper (CZ31) for crimping contacts 3111 03
3.5
Potentiometers
P
OTENTIOMETER
P1
Figure 3-20
Potentiometer P1 – Location & Adjustment Range
«ESCON 36/3 EC Connector Set» (425255)
For Socket
Specification
Quantity
J1
Hirose crimping socket, 2 poles (DF3-2S-2C)
1
J1
Hirose crimping contact for socket (DF3-22SC…)
3
J5
Hirose crimping socket, 6 poles (DF3-6S-2C)
1
J5, J6
Hirose crimping contact for socket (DF3-2428SC…)
14
J6
Hirose crimping socket, 7 poles (DF3-7S-2C)
1
Adjustment angle
210°
Type
Linear
