Connections
Connectors
© 2017 maxon motor. Subject to change without prior notice.
maxon motor control
EPOS2 Positioning Controller
Document ID: rel7748
4-31
EPOS2 24/2 Hardware Reference
Edition: November 2017
4.2.6
Motor/Hall Sensors Connector (J8)
Figure 4-30
Motor/Hall Sensors Connector (J8)
Figure 4-31
Hall Sensor Input Circuit
Pin
Signal
Description
1
Motor winding 1
Winding 1
2
Motor winding 2
Winding 2
3
Motor winding 3
Winding 3
4
+V
Hall
Hall sensor supply v5 VDC / 30 mA
5
GND
Ground of Hall sensor supply
6
Hall Sensor 1
Hall sensor 1 Input
7
Hall Sensor 2
Hall sensor 2 Input
8
Hall Sensor 3
Hall sensor 3 Input
Notes
Suitable connector
MKF 13268-6-0-808 STOCKO Elektronik GmbH
Hall sensor supply voltage
+5 VDC
Max. Hall sensor supply current
30 mA
Input voltage
0…+24 VDC
Logic 0
typically <0.8 VDC
Logic 1
typically >2.4 VDC
Internal pull-up resistor
2.7 k
Ω
(a5 VDC)
