maxon motor
EPOS 24/1 Getting Started
EPOS Positioning Controller
6.
‘Startup Wizard’ Step 4 for EC motors:
Motor Pole Pair
a)
Select the correct number of pole pairs.
Figure 12: Startup wizard dialog for choosing
EC motor pole pairs
b)
a)
b)
c)
Click on the button ‘Weiter’ for the next
step.
6.
‘Startup Wizard’ Step 4 for DC motors:
Motor Data
Select the maximum permissible speed.
Select the nominal current (maximum
continuous current).
Select the thermal time constant of the
winding.
Figure 13: Startup wizard dialog for setting
DC motor data
d)
Click on the button ‘Weiter’ for the next
step.
7.
‘Startup Wizard’ Step 5 for EC motors:
Motor Data
a)
b)
c)
Select the maximum permissible speed.
Select the nominal current (maximum
continuous current).
Select the thermal time constant of the
winding.
Figure 14: Startup wizard dialog for setting
EC motor data
d)
a)
Click the button ‘Weiter’ for the next step.
7.
‘Startup Wizard’ Step 5 for DC motors:
Position Sensor Type
Select the used position sensor type
Figure 15: Startup wizard dialog for choosing
DC motor position senso type
r
b)
Click the button ‘Weiter’ for the next step.
Edition July 2007 / Subject to change
maxon motor control
17
