Utility (MWCU). This chapter
12
Chapter 3 Configuration
MAXNET
Wireless Adapter WP7300-SG can be configured by Maxnet Wireless Client
describes how to configure your
MAXNET
Wireless Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and
use the data security encryption features.
After Installing the Adapter, the Adapter’s tray icon
will appear in your system tray. It
appears at the bottom of the screen, and shows the signal strength using color and the received
signal strength indication (RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor si gnal strength and the RSSI is less than 5dB.
If the icon is yellow, there is poor sign al strength and the RSSI is between 5dB and 10dB.
If the icon is green, there is good signal strength and the RSSI is between 10dB and 20dB.
If the icon is green, there is excellent si gnal strength and the RSSI is more than 20dB.
Double-click the icon and the
MWCU
u
tility
will run. You can also run the utility by clicking the
Start>Program>Maxnet >
MWCU>
Maxnet Wireless Client Utility. The MWCU utility provides a complete
and easy to use set of tools to:
Display current status information
Edit and add configuration profiles
Display current diagnostics information
The section below introduces these above capabilities.
3.1 Current Status
The Current Status tab contains general information about the program and its operations. The
Current Status tab does not require any configurations.
108M Wireless Access Point User Guide
108M Wireless Adapter User Guide
MAXNET WP7300-SG
