PRODUCT DESCRIPTION
1. Product Description
The MNAC and MNDC are modular power supplies that supply the re24 VDC to the MAXNET Active Chassis
backplane. This allows any MAXNET active module (AMP’s, RF Switch) to be installed in any remaining active chassis slot
to receive power. Both MNAC and MNDC have 24 VDC redundant powering capabilities, although only the MNDC provides
true load sharing. Installing two power supply modules into the chassis will maintain power to the backplane in the event that
one of them fails. Both the MNAC and the MNDC include a 24 VDC rear terminal block connection for the remote chassis
powering options. They are connected to the Active MAXNET Chassis through a hot-swapping backplane. The MNAC and
MNDC modules feature front panel LED power indication and +24 VDC backplane voltage monitor connections.
In addition to the standard powering modules, an optional current monitoring function is available in both the MNAC and
MNDC to provide remote indication (via the rear terminal block) of current fluctuations caused by an active module failure.
The MNRPS is a module that supplies power to an Active MAXNET Chassis backplane from a remote 24 VDC source. It
features front panel LED power indication and +24 VDC backplane voltage monitor connections.
Please refer to the web page for up-to-date specifications – atxnetworks.com
1.1. Technical Specifications
MAXNET
®
– MNAC/MNDC Modular Power Supply – Installation & Operation Manual
1-1
CHAPTER 1: PRODUCT DESCRIPTION
Table #1: Ordering Information
Table #2: Technical Specifications
Part Number
Description
MNRPS
24V, 3.6A Remote Powering Unit
MNRPSCM
24V, 3.6A Remote Powering Unit with Current Monitoring
MNAC-110
110 VAC to 24V, 3.6A Diode or'd Redundant Power Supply
MNAC-110CM
110 VAC to 24V, 3.6A Power Supply with Current Monitor
MNAC-220
220 VAC to 24V, 3.6A Diode or'd Available (Consult ATX)
MNAC-220CM
220 VAC to 24V DC, 3.6A Power Supply with Current Monitor
MNDC
-48 VDC to 24V, 3.6A True Load Sharing Redundant Power Supply
MNDCCM
-48 VDC to 24V, 3.6A Power Supply with Current Monitor
Dimensions
8.66”H x 1.82”W x 11.75”D (21.99H x 4.62W x 29.84D cm)
