Maxlogic ML-221XX series, User Manual

Page: 3 / 16

1- INTRODUCTION
2- WARNINGS
Producer-manufacturer or importer firms’ title, address, and telephone number
Manufacturer Firm:
MAVILI ELEKTRONIK TICARET VE SANAYI A.S.
SERIFALI MAHALLESI, KUTUP SOKAK NO: 27/1-2-4 UMRANIYE - ISTANBUL - TURKEY
TEL: +90 216 466 45 05 - +90 216 466 45 10
Service stations’ communication information that related spare parts have been provided
Authorized Services:
MAVILI ELEKTRONIK TICARET VE SANAYI A.S.
SERIFALI MAHALLESI, KUTUP SOKAK NO: 27/1-2-4 UMRANIYE - ISTANBUL - TURKEY
TEL: +90 216 466 45 05 - +90 216 466 45 10
TEKSIS TEKNIK ELEKTRONIK SIS. TIC. VE SAN. LTD. STI.
SERIFALI MAHALLESI, KUTUP SOKAK NO: 27/3 UMRANIYE - ISTANBUL - TURKEY
TEL: +90 216 313 60 60 - +90 216 313 47 49
Expected operation life which has been determined and announced by related ministry.
This device’s expected operation life is 7 years.
Maxlogic ML-221XX series conventional fire alarm control panel has, 2, 4, 8, 12 ve 16 zones (detection circuits) according to model
with 24V DC operating voltage. Power supply of panel has an automatic battery charger and charger control circuit. Fire and fault
conditions for each zone are indicated by individual LEDs on the fascia. Zone circuits and sounder outputs are continuously
supervised for open and short circuits. Zones can be put into Test or Disable Mode.
The panel has one sounder output, fire and fault relay outputs and one auxiliary power supply output for energising external
equipment.
The control unit contains static-sensitive high quality electronic control equipment. Do not use the panel before reading this
manual.
The subjects that should be noticed during handling and transportation
• This product should be stored as packed on indoor areas.
• Storing ambient temperature should be (-30°C) to (+60°C), and relative humidity should not be exceed %95 as uncondensed.
• Product’s transportation can be performed as packed by train, road, ship and air vehicles.
• Transportation ambient temperature should be (-30°C) to (+60°C).
• The boxes that contain this device should be placed safely and properly to prevent any damage by each other.
Page 3/16 KK-642.042 Rev.No:0 01.11.12 ML-221XX User Manual
Warnings that may dangerous or harm people’s or environment’s health during operation
• MP-8 Panel’s main supplied power is 230V AC. Do not make connections under power to the danger of electric shock
• Ground connection must be made of the panel definitely.
• Please consider there are some electronic components inside this device, so do not clean this device by dry rag etc
The subjects related with maintenance, fixing or device’s cleaning operations that the customer/user has been done on their own
The following points should be checked each working day by user. Observed malfunctions should be registered, and corrective
activities which were related with these problems should be performed as soon as possible.
• If device shows its tranquility condition or if there is a deviation from tranquility condition and authorized service has been
informed if needed.
• When required operations have been performed to alarms which have been registered after last operation day.
• If disable, experiment or silence operations have been occurred and system turned back to normal operation mode.