Operating Instructions
WARNING:
• Risk of Fire - Supply conductors (power wires) connecting the fixture must be rated minimum 90
℃
.
If uncertain consult an electrician.
• Risk of Fire/Electric Shock - If not qualified, do not attempt installation. Contact a qualified electrician.
CAUTION:
• For your safety read and understand instructions completely before starting installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Before attempting installation, check your local electrical code, as it sets the wiring standards for your
locality.
NOTES:
• If luminaire (fixture) is to be switched from a wall switch, make sure black power supply wire is connected to
the switch. DO NOT connect the white supply wire to the switch.
• Make certain no bare wires are exposed outside the wire nut connectors.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.
• Warranty is not applicable to lamps not installed in compliance with:
- National Electrical Code (NEC)
- The Standard for Safety of Underwriters Laboratories Inc. (UL)
SERIES: ML2LAxA CCT SELECTABLE
Operating Temperature: -20°C to 40°C Damp Location Rated
PRODUCT DIMENSIONS:
General Safety Information
• To reduce the risk of death, personal injury or property damage from fire, electric
shock, falling parts, cuts/abrasions, and other hazards read all warnings and
instructions included with and on the fixture box and all fixture labels.
• Before installing, servicing, or performing routine maintenance upon this equipment,
follow these general precautions.
• Commercial installation, service and maintenance of luminaires should be performed
by a qualified licensed electrician.
• For Residential installation: If you are unsure about the installation or maintenance
of the luminaires, consult a qualified licensed electrician and check your local
electrical code.
• DO NOT INSTALL DAMAGED PRODUCT!
• This fixture is intended to be connected to a properly installed and grounded UL listed junction box.
MaxLite
LED ARCHITECTURAL CCT SELECTABLE
®
Picture is for illustration purposes
only. Your model may vary.
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: [email protected]
Page: 1
REV: 11/19/21
120V
120-
277V
Small
Small
Medium
Medium
Large
Large
ML2LAxA Series
15.98”
5.12”
14.01”
4.76”
11.81”
4.29”
15.04”
5.12”
13.03”
4.8”
5.07”
10.94”
10.94”
4.02”
3.74”
13.03”
15.04”
4.09”
11.81”
3.43”
14.01”
3.9”
15.87”
4.33”
10.94”
4.02”
3.74”
13.03”
15.04”
4.09”
11.81”
3.43”
14.01”
3.9”
15.87”
4.33”
10.94”
4.02”
3.74”
13.03”
15.04”
4.09”
11.81”
3.43”
14.01”
3.9”
15.87”
4.33”
15.98”
5.12”
14.01”
4.76”
11.81”
4.29”
15.04”
5.12”
13.03”
4.8”
5.07”
10.94”
15.98”
5.12”
14.01”
4.76”
11.81”
4.29”
15.04”
5.12”
13.03”
4.8”
5.07”
10.94”
