Installation Requirements
© Copyright 2016. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: [email protected]
• Select a suitable location for the fitting;
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the fitting.
- Ensure the fitting is not installed next to any air vents and is not in any moist or damp areas.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure there are no components missing before
assembling. If parts are missing, return the complete product to the place of purchase for inspection or
replacement.
• Check whether the fitting has been damaged during transport. Do not operate/install any product which
appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or
replacement.
• Do not plug into the main power socket outlet before or during assembly. Only do so after the portable lamp is
fully assembled and ready to use for the first time.
1.
Remove all packaging material from the product.
2.
Select a suitable location for the light fitting. See the installation requirements above.
3.
Adjust the head of the lamp (A) to the desired angle. Do not use excessive force and do not adjust more than
the 45° angle shown on the next page, as this may damage the adjustable joint and the internal wires.
4.
Insert main socket outlet and ensure it is fully plugged in.
5.
Turn power on at the main power socket outlet.
6.
Use the cord lineswitch (B) to turn the lamp on/off.
Installation Directions
Operating Instructions
LED Desk Lamp
MaxLite LED Desk Lamp
®
NOTE: When adjusting the head of the lamp, do not adjust more than the 45° angle shown above, as this
may damage the adjustable joint and the internal wires.
MaxLite offers a warranty on this product, please see:
http://www.maxlite.com/resources/warranties for more information.
LED Lamp Warranty
Page: 2
REV: 10/17/16
